Loksafe is a certified provider and installer of Click2Enter. We can integrate this system into existing gate operators or doors with access control allowing emergency responders to access your property within seconds. Click2Enter is an approved system in compliance with an ordinance currently being enforced by both Shreveport & Bossier City.

Click2Enter:

Click2Enter:

  • Emergency access control for gates and doors using radio transmissions
  • Communicates with emergency responder mobile or portable radio transceiver
  • Opens gates & doors with a click of the radio
  • Improves emergency response times
  • Officer safety friendly
  • Software interface allowing easy programming
  • Reflective front identification label to support faster nighttime identification

The Click2Enter-I.V4 takes advantage of state-of-the-art electronics presently being designed in to scanner radio technology. This modified scanner/radio technology provides public safety agencies with a quick, safe, reliable, and stealthy means to activate gates, bollards, doors, or any security control mechanism.

Public safety agencies, such as Fire Departments, Police/Sheriff Departments, and Ambulance/Rescue Companies are issued radio frequencies by the FCC for their restricted use only. Possession of transmitting devices for non-authorized personnel is tightly controlled and transmitting on these frequencies is against the law (Federal and State statutes). The public's right to receive these emergency agency communications is not restricted, thus it is legal to possess emergency response scanning devices.

The Click2Enter-I.V4 combines the scanner/receiver technology with control technology to act as a radio controlled key to open access control devices (gates or security control mechanisms), thus allowing public safety agencies or any authorized users immediate access to deal with emergencies as the occur. To activate the Click2Enter-I.V4, the operator must be close to the device, and using short transmission pulses of their radio transceiver (see operating instructions) is all that is required to initiate an instant activation/entry.

The Click2Enter-I.V4 uses technology that is inherent in most all radio broadcast equipment and adapts this technology to work as a control mechanism.